SIEMENS SIMOTICS XP low-voltage motors run for an enormously long time and with absolute reliability even under the most extreme conditions – both on the mains and on all available converters.
Hazardous Zone
1
1
2
21
22
Type of protection
Ex db
Ex eb
Ex ec
Ex tb
Ex tc
Power range
0,25 – 460 kW
0,12 – 165 kW
0,09 – 1000 kW
Voltage
50/60 Hz: 230 – 690 V
Shaft height
71 – 355 mm
63 – 315 mm
63 – 450 mm
Number of poles
2, 4, 6, 8
2, 4, 6
2, 4, 6, 8
Degrees of protection
IP55 to IP66
IP65, IP66
IP55, IP66
Motor efficiency class
IE3
IE3, IE4 (only 1MB5)
SIEMENS SIMOTICS XP covers classes:
Zone 21: 2D Ex tb (Db) An area in which it is expected that an explosive gas atmosphere comprising a dust-air mixture will be present occasionally during normal operation.
Zone 22: 3D Ex tc (Dc) An area in which it is expected that an explosive gas atmosphere in the form of a cloud of combustible dust in air will be present only rarely and then only for a short period during normal operation.
Zone 2: 3G Ex ec (Gc) An area in which it is expected that an explosive gas atmosphere will be present only rarely and then only for a short period during normal operation.
Zone 1: 2G Ex eb (Gb) An area in which it is expected that an explosive gas atmosphere will be present occasionally during normal operation
Zone 1: 2G Ex db (Gb) An area in which it is expected that an explosive gas atmosphere will be present occasionally during normal operation
Application:
The explosion-protected motors are used in the following sectors to prevent explosion hazards that result in serious injury to persons and severe damage to equipment.
Chemical and petrochemical industry
Production of mineral oil and gas
Gas works
Gas utility companies
Gas stations
Coking plants
Mills (e.g. grain, solids)
Sewage treatment plants
Wood processing (e.g. sawdust, tree resin)
Other industries subject to explosion hazards
SIMOTICS XP CHEMSTAR – industry-specific motor solution for Chemie, Petrochemie, Oil & Gas
Technology overview:
Motors siemens simotics xp comply with European Directive 2014/34/EU (ATEX): As an alternative to the European directive, certificates for IECEx (Australia), EACEx (Eurasian) and CCCEx (China) are also available.
Warning: special motor configuration and certified thermal protection of the windings is required in case of inverter supply